Time Clocks
- Electronic - Swiss made
For a discussion on the use and application of Time Locks see - Time Locks


Time Clocks Bodies
The LaGard time clock bodies are made from strong die cast metal,
have snap action releases and come in both 2 and 3 movement bodies.
The 2 and 3 movement bodies have shock resistant mounts.
All mounting hardware supplied.
Time Movements
- Electronic - made by STB - Swiss made
- 114E - 1010 - 199 Hrs - Snap action - reset at any time
- 114E -1030 - 999 Hrs - Snap action - reset at any time
- 134 - - - - - - - Day of the week setting, plus 199 Hours
Electronic clock movements can be purchased individually for
replacement / service work and are fully interchangeable
with : S&G, Rench, Yale, Lefebure, Chubb,
and Timemaster mechanical movements.
Features of Electronic time movements
Quartz movements with low battery indicator
Accuracy - can be set to increments of1 minute
UL listed - Swiss made
Incredibly easy to set and to adjust time if required
Unit can be disarmed after setting
Easy replacement for broken mechanical clock movements
Small time periods can be set - eg. 1 hour & 15 Mins for lunchtime
Very reliable - saves money as 2 movements is sufficient instead of 3 movements
Electronic movements are not broken by overwinding or attempting to reset the time period
The last 2 points can save up to 40% over mechanical units
-
Limitations of mechanical time clocks
Mechanical time clocks are difficult to set - at best can be set within 10 minutes
Maximum time period of 144 hours
Setting operation is done through a small magnifying glass in an attempt to make it easier - setting is almost impossible for people with poor eyesight, or in poor light conditions.
Electronic time clock models
|

|
2 movement 2400 body
will accept any mechanical
or electronic movement |
|

|
3 movement 1600 body
will accept any mechanical
or electronic movement |
An ALTERNATIVE to TRADITIONAL TIME CLOCKS
The DIGIGARD lock is a combined electronic Combination lock
and Time lock, and replaces the top lock on the door.
DIGIGARD provides a cheaper, and more accurate method of time
locking, and is easily installed on both new and existing doors.
The DIGIGARD lock supplies all and more of the features of a
time lock, and has the following advantages :
DUAL CONTROL - where two people are needed to open
the lock (optional)
Full manager control with up to 8 staff members registered
in the lock. Manager can delete, add and temporarily
disable any of the users
TIME LOCK with 2 settings - 100 hours or 1000 hours.
In the event of a hold-up the bandit can be shown the
Digigard lock and shown that a time lock is operating and
preventing staff from opening the door.
You can even activate a silent hold-up alarm
(duress alarm) with the lock while showing the bandit that
the time lock is armed and the door cannot be opened.
The Time lock is set from the outside of the door
- with the door SHUT
Digigard can show the time left until the time lock
disarms, as the unit is on the outside of the door
- Audit trail of the last 99 operations of the lock
- TIME DELAY entry - (optional)
- Automatic locking of the door when shut
- 6 digit combination codes - very easy to use
- Changing combination codes is easy and
tolerant of mistakes.
Majour cost savings by eliminating service calls.
Security procedures can be at last be followed.
Major cost saving achieved as the Digigard can be fitted to a door in 15 minutes.
NO door modifications are needed, nor any special components manufactured.
The
DIGIGARD lock simply replaces the top lock on the door. Security levels are greatly enhanced. The Digigard will fit ANY door from ANY manufacturer.
SecuraCorp International Pty. Ltd.
Tel: (61 2) 91445155 | Fax: (61 2) 91445166 | email: secura@ozemail.com.au | INDEX PAGE
For more information or a quotation on your requirements please make contact
giving your : Name, Country, Fax No, and market or product of interest.